Industrial Batch Oven for Multi-Stage Processing

High-temperature batch curing, drying, and heat treatment with programmable multi-segment control—built for electronics, automotive, metal parts, and chemicals.

Product Introduction:

The ZonHoo Industrial Batch Oven line is engineered for manufacturers who need reliable, repeatable results across mixed parts and multi-stage recipes—without paying a custom-equipment premium. Standardized core platforms with selectable airflow (horizontal/vertical/combination), heat sources (electric SCR, indirect gas, IR assist, or vacuum), and capacities from 100 L to 5000 L let you lock in the right specification quickly and scale with confidence. With operating envelopes from 100–600 °C and payloads ≥1000 kg, these ovens are built for powder curing, adhesive/epoxy cure, drying, pre-heat, stress-relief, aging, and light heat-treatment in electronics, automotive, metals, and chemicals.

Heavy-duty construction, cleanable interiors, and PID + SCR smooth power deliver fast heat-up and tight temperature uniformity (±2–3 °C at load, application-dependent). Programmable ramp/soak control with recipe library, batch ID/barcode start, and data logging (CSV/PDF) supports QA audits, SPC, and traceability. Every unit is factory tested and documented to cut install/start-up time; FAT/SAT, spare-parts kits, and remote diagnostics keep uptime high and TCO low. Compliance options include CE, UL-listed components, and AMS 2750 mapping on request, with typical lead times of 8–12 weeks depending on size and temperature package.

Industrial Batch Oven Details:

Industrial Batch Oven

Specifications for Batch Baking Oven

Temperature Ranges:
- General: 100–250 °C (ambient to 250 °C)
- High-Temp: 250–400 °C
- Ultra-High: 400–600 °C (application-specific insulation/elements/door hardware)
Heating / Process Modes:
- Forced convection hot-air circulation (horizontal crossflow / vertical downflow / combination)
- Vacuum heating (with nitrogen purge / staged vent)
- Infrared radiation assist for rapid surface cure or moisture drive-off
Controls:
- Multi-segment programmable ramp/soak, stage timers, event outputs
- PID + SCR proportional power for smooth ramps (no overshoot)
- Recipe library, operator permissions, batch ID/barcode start
- Data logging (CSV/PDF), batch reports, alarms, and remote HMI support
Capacity & Payload: 100 L–5000 L chambers; payloads up to and above 1000 kg (racks, carts, custom fixtures)
Construction: 304 SS/painted steel interiors, high-temp seals, 100–150 mm insulation, thermal breaks at doors/thresholds
Power: 208/230/380/415/460 V, 3-phase, 50/60 Hz; electric (standard), indirect gas, or hybrid with IR assist

From Concept to Installation —
We’ve Got You Covered

Standard Features for Industrial Batch Oven

Options & Integrations

Airflow selection per load geometry (horizontal, vertical, or combination)
High-temp packages to 600 °C (elements, insulation, door hardware, safety)
Vacuum chamber with nitrogen purge, staged exhaust, moisture control
Humidity/exhaust control with staged or feedback modes
Load carts, multi-rack fixtures, quick-change tray rails
Data acquisition, OPC UA/MQTT integration, e-sign batch release
Safety: independent high-limit, purge cycle, door interlocks, E-stop
Compliance: CE, UL-listed components, AMS 2750 mapping (on request)

Application Focus & Industry Use

Electronics: SMD/SMT adhesive cure, MLCC pre-cure/final cure, PCB aging/burn-in, conformal-coat bake
Automotive & Mechanical: Plastic parts drying, elastomer post-cure, metal parts pre-heat / temper / stress-relief
Chemical & Materials: Resin cure, binder removal, powder drying, staged reaction/drive-off
Advantage: Handles mixed materials and multi-stage recipes in one controlled batch, aligning with quality, throughput, and traceability targets.

Quality Assurance & Delivery

From food processing to advanced manufacturing, this oven handles a range of thermally-driven processes.

Food & Ingredient Production
Ideal for roasting nuts, seeds, and grains; drying jerky and pet treats; and finishing dried fruits and certain herbal materials. Works best with non-sticky items or those with low-sugar glazes.
Industrial Curing & Drying
Used for baking coatings on metal powders, curing resins or activating catalysts, post-baking elastomers, and pre-curing painted or primed components.
Precision Electronics & Composites
Performs reliable pre-bake cycles and critical moisture removal prior to the final high-temperature cure of sensitive components.
Scalable from R&D to Full Production
Seamlessly transfer processes from lab-scale rack ovens to walk-in production units, using the same proven recipe logic for consistent results at any volume.

Typical Specifications

Uniformity: Target ±2–3 °C at full load (process-dependent)
Heat-Up: To 200 °C in 20–30 min (size/load-dependent)
Air Changes: Configurable; staged exhaust available for volatiles
Recovery: Fast door-open recovery via VFD-controlled blowers
Reporting: Auto CSV/PDF batch report with alarms & operator notes

Walk-In Oven FAQ

What are the benefits of choosing a batch baking oven over continuous ovens?

Batch baking ovens offer precise control over smaller batches, making them ideal for industries where consistency and flexibility are crucial. They are perfect for applications like food production, where multi-tray baking and quick changeovers are essential.

How does the ZonHoo Industrial Batch Baking Oven ensure even heating?

Our ovens utilize advanced airflow designs, including side-to-side and top-down recirculation, to provide uniform heat distribution. This prevents hot and cold spots, ensuring high-quality results across the entire batch.

What materials can be processed in this oven?

The Industrial Batch Baking Oven is versatile enough to handle a wide range of materials, including food products (e.g., nuts, seeds, and snacks), electronics (e.g., pre-baking components), and industrial materials (e.g., resin curing, powder baking).

How does the oven help improve production efficiency?

With its efficient thermal control and rapid recovery time, our oven minimizes downtime between cycles. The ability to pre-program and save baking profiles also reduces setup time for each batch, improving overall throughput.

Can I integrate this oven with other factory equipment?

What safety features does the oven include?

The oven includes multiple safety features, such as dual over-temperature protection, airflow and blower interlocks, and electrical fault protection, to ensure safe and reliable operation even in demanding environments.

Manuals & Resources

Conoce nuestras soluciones en la industria de la cerámica