Industrial Batch & Continuous Ovens Manufacturer
ZonHoo is a modern, vertically integrated industrial oven manufacturer dedicated to building high-quality industrial batch and continuous ovens for a wide range of industries—including aerospace, automotive, electronics, composites and general manufacturing. ZonHoo strives to meet the unique needs of every customer worldwide with pre-engineered lines and fully custom solutions for curing, drying and heat-treating processes, helping plants improve throughput, consistency and uptime.
Industrial Ovens, Engineered for Production — Raise Capacity
ZonHoo builds industrial ovens for real production—whether you run batch jobs or a conveyor line. We start with proven designs so you can get gear faster, then dial in airflow and closed-loop temperature control for tight uniformity, quick heat-up, and fast recovery after the door opens.
Before you sign off, we can run trials on our demo units to check your parts, temps, and cycle time. When it ships, you get a turnkey system plus acceptance data, so you can ramp with confidence.
Need flexible changeovers? Our batch ovens keep output up without beating up quality. Running 24/7 flow? Go with conveyor ovens to keep parts moving, clear bottlenecks, and cut manual touches. Got a special process? We’ll build custom industrial ovens and can integrate material handling, recipe management, and data logging—so you boost capacity, reduce rework, and protect uptime. Not sure where to start? Check the Industrial Oven Selection Guide.
Industrial Batch Ovens Built for Everyday Production
For multi-model work and small-to-mid batch runs, ZonHoo batch ovens heat fast, recover quickly after door open, and hold tight uniformity (±2–3 °C at full load). Size airflow for your rack layout, run ramp/soak with PID + SCR, and log every batch for QA. Common builds serve Powder Coating, Composite Curing, Annealing, and Tempering across Electronics/Electrical, Automotive, and Metal Heat Treatment. Not sure which size fits your parts? See Oven System Planning.
Continuous Conveyor Ovens for 24/7 Flow
Built for round-the-clock throughput with stable takt time and low WIP, ZonHoo conveyor ovens keep parts moving—no batching, fewer touch points. Configure zoned heating, IR + convection, and recipe enforcement with barcode start for clean hand-offs. Typical lines cover Drying, Post-Curing, and Aluminum Aging; widely used in Composites, Metalworking, and Coating Industry. Plan the layout with Oven System Planning and safeguard uptime via Service & Spare-Parts Center.
Custom Industrial Ovens—Engineered to Your Specification
ZonHoo designs to spec for unique airflow, custom fixtures, and hazardous-duty requirements—CFD-tuned ducting, full data logging, and EX packages with LEL monitoring and purge. Solutions cover Vacuum Curing and Sintering / Thermal Processing for Pharma/Food and the Electric Motor. Safety options: Commitment-To-Safety. One-off or EX builds: Special Oven Customization
Industrial Ovens That Fit Your Process—and Your Timeline
At ZonHoo, we don’t sell catalog metal boxes. We deliver production-proven ovens that match your load, takt time, and plant constraints—so you ramp faster with less risk.
Our industrial ovens and furnaces:
- Sized to your space and workflow: racks, carts, pass-through or conveyor.
- Built to your temperature and uniformity targets—typical ±2–3 °C at full load.
- Safety first: independent limiters, interlocks, LEL monitoring options.
- Energy-aware controls: fast door-open recovery, efficient recirculation.
A Design Process That Stands Behind Your Numbers
Every ZonHoo oven is validated before it ships. CFD-tuned airflow, full-load uniformity mapping, and a gated plan—Design → Fabrication → FAT → Shipment → SAT—give you auditable results, not promises.
- Professional engineering reviews and risk checks.
- Full-load mapping and ramp/soak verification at your spec.
- Logistics planning and monitored shipping.
- Modular assembly, clean wiring, documented QA.
- Turn-key SAT with training and handover pack.
What Type of industrial Oven or Furnace Do You Need?
Industrial Oven
ZonHoo industrial ovens are general-purpose workhorses for day-to-day production. Choose this family when you need reliable batch heating for trays, racks, or carts without a lot of special requirements. Typical jobs include preheating, baking, curing, or drying parts in small to medium batches.
- Production mode: General-purpose batch heating for trays, racks, or carts
- Typical uses: Preheating, baking, drying, light curing for small to medium batches
Industrial Curing Oven
Pick our industrial curing ovens when your main goal is to cure coatings, paints, powder, resins, or adhesives to a consistent finish. Airflow, exhaust, and temperature control are tuned to avoid cold spots, under-cure, or over-bake, so you get repeatable surface quality on every load.
- Production mode: Batch curing lines for paints, powder, resins, and adhesives
- Typical uses: Metal finishing, powder coating, enamel & varnish curing
Industrial Drying Oven
Industrial drying ovens are built to pull out moisture, solvents, or water-based carriers quickly and safely. This family is ideal for drying parts, components, or bulk materials before the next process step, with strong air circulation and controlled exhaust to shorten drying time.
- Production mode: Fast removal of moisture or solvents before the next process step
- Typical uses:Metal parts, plastics, electronics, bulk materials, and components
Heat Treatment Oven
Choose a heat-treatment oven when you need to change the material properties of metal or composites — not just “heat it up.” These ovens support tempering, annealing, aging, stress relieving, and post-curing, with tight temperature control and recipes to match your process specs.
- Processes: Tempering, annealing, aging, stress relieving, post-curing
- Materials: Steel, aluminum, castings, welded structures, and precision parts
High Temperature Oven
High-temperature ovens are used when standard industrial ovens can’t reach your required setpoint. This family is designed for elevated temperatures, improved insulation, and heavy-duty construction, making it suitable for demanding processes such as high-temp curing, sintering, or special heat treatment.
- Temperature focus: Elevated-temperature curing and heat treatment
- Typical jobs: High-temp curing, sintering, special process development
Large Industrial Oven
Select a large industrial oven when your parts, racks, or fixtures are simply too big for standard sizes. These ovens offer oversized workspaces, reinforced structures, and powerful airflow systems so you can heat large frames, welded assemblies, long profiles, or multiple carts in a single batch.
- Part size: Oversized parts, long profiles, large welded frames, multi-cart loads
- Layout: Wide, deep, or tall chambers configured to match your product envelope
Continuous Ovens
Continuous ovens are the right choice when your production never stops and you want a constant flow of parts. With belt, chain, or overhead conveyor designs, this family supports in-line heating, drying, or curing directly in your production line to improve throughput and reduce manual handling.
- Flow: In-line conveyor or overhead systems for 24/7 continuous production
- Goal: High throughput with minimal manual handling between process steps
Custom Industrial Ovens
If your process doesn’t fit a standard box, choose a custom industrial oven. ZonHoo engineers can adjust size, airflow, temperature profile, loading method, and controls around your product and plant layout, whether you need a special batch oven, a unique conveyor system, or a fully integrated line.
- Design: Size, airflow, loading, and controls tailored to your process
- Projects: Non-standard layouts, new products, or full line integration
We’ve got ready demo units you can use to test your process. Send us your material and targets, and we’ll run the trials, share the data, and talk through what works. If it checks out, we’ll take it from drawing to a finished machine—design, build, test, ship, and start-up on site. Hand the project to ZonHoo and focus on your business; we’ll make sure the equipment does what you need.
Further Reading: Which Industrial Oven Do I Need?→
Further Reading: See our Custom Oven options →
Our clients recommend us
Our latest news
